Panasonic KX-UT133-B - RTP Settings; Dscp_Rtp_N; Rtcp_Intvl_N; Max_Delay_N

Default Value 1
Web User Interface Reference
• G722 (Priority) (Page 107)
• PCMA (Priority) (Page 107)
• G726–32 (Priority) (Page 108)
• G729A (Priority) (Page 108)
• PCMU (Priority) (Page 108)
5.6.2 RTP Settings
DSCP_RTP_n
Parameter Name Example DSCP_RTP_1, DSCP_RTP_2, …, DSCP_RTP_4
Value Format Integer
Description Selects the DSCP level of DiffServ applied to RTP packets.
Value Range 0–63
Default Value 0
Web User Interface Reference RTP Packet QoS (DSCP) (Page 104)
RTCP_INTVL_n
Parameter Name Example RTCP_INTVL_1, RTCP_INTVL_2, …, RTCP_INTVL_4
Value Format Integer
Description Specifies the interval, in seconds, between RTCP packets.
Value Range 5–65535
Default Value 5
Web User Interface Reference RTCP Interval (Page 105)
MAX_DELAY_n
Parameter Name Example MAX_DELAY_1, MAX_DELAY_2, …, MAX_DELAY_4
Value Format Integer
Description Specifies the maximum delay, in 10-millisecond units, of the jitter buffer.
Value Range
3–50 (´ 10 ms)
Note
• This setting is subject to the following conditions:
– This value must be greater than "NOM_DELAY"
– This value must be greater than "MIN_DELAY"
– "NOM_DELAY" must be greater than or equal to
"MIN_DELAY"
202 Administrator Guide Document Version 2011-06
5.6.2 RTP Settings