Panasonic KX-UT133-B - Rtcp_Enable_N; Rtcp_Send_By_Sdp_N; Rtp_Close_Enable_N

Description Specifies the interval, in milliseconds, between transmissions of RTP
packets.
Value Range
• 20
• 30
• 40
Default Value 20
Web User Interface Reference RTP Packet Time (Page 102)
RTCP_ENABLE_n
Parameter Name Example RTCP_ENABLE_1, RTCP_ENABLE_2, …, RTCP_ENABLE_4
Value Format Boolean
Description Selects whether to enable or disable RTCP (Real-Time Transport
Control Protocol). For details, refer to RFC 3550.
Value Range
• Y (Enable RTCP)
• N (Disable RTCP)
Default Value
N
Web User Interface Reference RTCP Enable (Page 104)
RTCP_SEND_BY_SDP_n
Parameter Name Example RTCP_SEND_BY_SDP_1, RTCP_SEND_BY_SDP_2, …,
RTCP_SEND_BY_SDP_4
Value Format Integer
Description Specifies whether to send RTCP signals by SDP (Session Description
Protocol).
Value Range 0–1
– 0: Send RTCP signals using the value specified in
RTCP_INTVL_n.
– 1: Send RTCP signals using the value specified in the SDP attribute
"a=rtcp:".
Default Value 0
RTP_CLOSE_ENABLE_n
Parameter Name Example RTP_CLOSE_ENABLE_1, RTP_CLOSE_ENABLE_2, …,
RTP_CLOSE_ENABLE_4
Value Format Boolean
Description Specifies whether to enable processing to close held RTP sockets.
Document Version 2011-06 Administrator Guide 205
5.6.2 RTP Settings