Panasonic KX-UT133-B - General Information on the Configuration Files; Configuration File Parameters

Category Parameter Name Ref.
SIP_TRANSPORT_n
*1
Page 228
SIP_ANM_DISPNAME_n
Page 229
SIP_ANM_USERNAME_n
Page 229
SIP_ANM_HOSTNAME_n
Page 229
SIP_DETECT_SSAF_n
*1
Page 230
SIP_CONTACT_ON_ACK_n
Page 230
SIP_TIMER_B_n
*1
Page 230
SIP_TIMER_D_n
*1
Page 231
SIP_TIMER_F_n
*1
Page 231
SIP_TIMER_H_n
*1
Page 231
SIP_TIMER_J_n
*1
Page 231
ADD_TRANSPORT_UDP_n
Page 232
ADD_EXPIRES_HEADER_n
Page 232
SIP_HOLD_HOLDRECEIVE_n
Page 232
SIP_ADD_DIVERSION_n
Page 232
SIP_RESPONSE_CODE_DND
Page 233
SIP_RESPONSE_CODE_CALL_REJECT
Page 233
*1
This setting can also be configured through the Web user interface.
5.2 General Information on the Configuration Files
5.2.1 Configuration File Parameters
The information on each parameter that can be written in a configuration file is shown in the tables below. The
information includes parameter name (as the title of the table), value format, description, permitted value range,
default value of each parameter, phone user interface reference, and Web user interface reference.
Parameter Name
This is the system-predefined parameter name and cannot be changed.
Note
• Certain parameter names end with "_n". This signifies that these settings can be made to each line
individually. The number of lines available varies depending on the phone being used, as follows:
– KX-UT113/KX-UT123: 1–2
– KX-UT133/KX-UT136: 1–4
Document Version 2011-06 Administrator Guide 147
5.2.1 Configuration File Parameters