Panasonic KX-UT133-B - Min_Delay_N; Nom_Delay_N; Rtp_Port_Min

Default Value 20
Web User Interface Reference Maximum Delay (Page 105)
MIN_DELAY_n
Parameter Name Example MIN_DELAY_1, MIN_DELAY_2, …, MIN_DELAY_4
Value Format Integer
Description Specifies the minimum delay, in 10-millisecond units, of the jitter buffer.
Value Range
1 or 2 (´ 10 ms)
Note
• This setting is subject to the following conditions:
– This value must be less than or equal to "NOM_DELAY"
– This value must be less than "MAX_DELAY"
– "MAX_DELAY" must be greater than "NOM_DELAY"
Default Value 2
Web User Interface Reference Minimum Delay (Page 105)
NOM_DELAY_n
Parameter Name Example NOM_DELAY_1, NOM_DELAY_2, …, NOM_DELAY_4
Value Format Integer
Description Specifies the initial delay, in 10-millisecond units, of the jitter buffer.
Value Range
1–7 (´ 10 ms)
Note
• This setting is subject to the following conditions:
– This value must be greater than or equal to "MIN_DELAY"
– This value must be less than "MAX_DELAY"
Default Value 2
Web User Interface Reference Initial Delay (Page 105)
RTP_PORT_MIN
Value Format Integer
Document Version 2011-06 Administrator Guide 203
5.6.2 RTP Settings