Panasonic KX-UT133-B - Tone Settings; Dial_Tone1_Frq; Dial_Tone1_Gain; Dial_Tone1_Rpt

5.5.2 Tone Settings
DIAL_TONE1_FRQ
Value Format Comma-separated Integer
Description Specifies the dual-tone frequencies, in hertz, of Dial Tone 1 using 2
whole numbers separated by a comma.
Value Range 0, 200–2000 (0: No tone)
Default Value 350,440
Web User Interface Reference Tone Frequencies (Page 122)
DIAL_TONE1_GAIN
Value Format Integer
Description Specifies the gain, in decibels, of Dial Tone 1.
Value Range -24–6
Default Value 0
DIAL_TONE1_RPT
Value Format Integer
Description Specifies whether Dial Tone 1 is repeated.
Value Range 0–1
– 0: No Repeat
– 1: Repeat
Default Value 0
DIAL_TONE1_TIMING
Value Format Comma-separated Integer
Description Specifies the pattern, in milliseconds, of Dial Tone 1 using up to 10
whole numbers (off 1, on 1, off 2, on 2…) separated by commas.
Note
• It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
Value Range 0–16000 (0: Infinite time)
Default Value 60,0
Web User Interface Reference Tone Timings (Page 123)
Document Version 2011-06 Administrator Guide 185
5.5.2 Tone Settings