4.6.4.3 Ringing Tone
Tone Frequencies
Description Specifies the dual-tone frequencies, in hertz, of ringback tones using 2
whole numbers separated by a comma.
Value Range 0, 200–2000 (0: No tone)
Default Value 440,480
Configuration File Reference RINGBACK_TONE_FRQ (Page 190)
Tone Timings
Description Specifies the pattern, in milliseconds, of ringback tones using up to 10
whole numbers (off 1, on 1, off 2, on 2…) separated by commas.
Note
• It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
Value Range 0–16000 (0: Infinite time)
Default Value 60,2000,3940
Configuration File Reference RINGBACK_TONE_TIMING (Page 190)
4.6.4.4 Stutter Tone
Tone Frequencies
Description Specifies the dual-tone frequencies, in hertz, of stutter dial tones to
notify that a voice mail is waiting, using 2 whole numbers separated by
a comma.
Value Range 0, 200–2000 (0: No tone)
Default Value 350,440
Configuration File Reference DIAL_TONE4_FRQ (Page 186)
Tone Timings
Description Specifies the pattern, in milliseconds, of stutter dial tones to notify that
a voice mail is waiting, using up to 22 whole numbers (off 1, on 1, off 2,
on 2…) separated by commas.
Note
• It is recommended that you set a value of 560 milliseconds or
more for the first value (off 1).
Value Range 0–16000 (0: Infinite time)
124 Administrator Guide Document Version 2011-06
4.6.4 Tone Settings
To Next Page
Loading...
