Panasonic KX-UT133-B - Hold_Tone_Rpt; Hold_Tone_Timing; Bell_Core_Pattern1_Timing; Bell_Core_Pattern2_Timing

HOLD_TONE_RPT
Value Format Integer
Description Specifies whether the hold tone is repeated.
Value Range 0–1
– 0: No Repeat
– 1: Repeat
Default Value 1
HOLD_TONE_TIMING
Value Format Comma-separated Integer
Description Specifies the pattern, in milliseconds, of the hold tone using up to 10
whole numbers (on 1, off 1, on 2, off 2…) separated by commas.
Value Range 0–16000 (0: Infinite time)
Default Value 190,190,190,3390
BELL_CORE_PATTERN1_TIMING
Value Format Comma-separated Integer
Description Specifies the cadence, in milliseconds, of pattern ID 1, described in the
LSSGR, GR-506-CORE, "Signaling for Analog Interfaces" section 14,
using up to 8 whole numbers (on 1, off 1, on 2, off 2…) separated by a
comma.
Value Range 0–5000 (0: Infinite time)
Default Value 2000,4000
BELL_CORE_PATTERN2_TIMING
Value Format Comma-separated Integer
Description Specifies the cadence, in milliseconds, of pattern ID 2, described in the
LSSGR, GR-506-CORE, "Signaling for Analog Interfaces" section 14,
using up to 8 whole numbers (on 1, off 1, on 2, off 2…) separated by
commas.
Value Range 0–5000 (0: Infinite time)
Default Value 800,400,800,4000
BELL_CORE_PATTERN3_TIMING
Value Format Comma-separated Integer
Document Version 2011-06 Administrator Guide 193
5.5.2 Tone Settings