Panasonic KX-UT133-B - Confirm New Password; Web Server Settings; Web Server Port

Default Value Not stored.
Note
• When a user logs in to the Web user interface for the first time,
after clicking OK on the authentication dialog box, the [Change
User Password] screen is displayed automatically to make the
user set a password.
Configuration File Reference USER_PASS (Page 149)
Confirm New Password
Description Specifies the same password that you entered in [New Password] for
confirmation.
Value Range 6–16 characters (except ", &, ', :, <, >, and space)
Note
• This value must be the same as the value entered in [New
Password].
Default Value Not stored.
Configuration File Reference USER_PASS (Page 149)
4.4.4 Web Server Settings
This screen allows you to change the Web server settings.
4.4.4.1 Web Server Settings
Web Server Port
Description Specifies the port number used by the Web server.
Value Range 80, 1024–49151
Note
• You cannot specify here the same port number as any of the
port numbers specified for the individual lines in [Source
Port] in 4.5.2.5 SIP Source Port.
Document Version 2011-06 Administrator Guide 85
4.4.4 Web Server Settings