3. [ ]/[ ]: Select "Yes" ® [ENTER]
4. [ ]/[ ]: Select "Yes" ® [ENTER]
Notice
• After performing IP Reset, the unit will restart automatically. To avoid problems, it is recommended that
you save your settings before performing IP Reset.
1.2.1.3 Resetting the Settings Made through the Web User Interface
(Reset Web Settings)
Performing Reset Web Settings from the Web user interface (® see 4.7.5 Reset to Defaults) resets the
settings made through the Web user interface to their default values.
When you use this feature, the unit will return to the status just after performing the most recent provisioning
or pre-provisioning.
Notice
• After performing Reset Web Settings, the unit will restart automatically. To avoid problems, it is
recommended that you save your settings before performing Reset Web Settings.
Note
• The settings configured through the phone user interface only will not be reset. However, settings that
can be configured through both the phone user interface and Web user interface will be reset.
1.2.2 Firmware Update
You can update the unit’s firmware to improve the unit’s operation. You can configure the unit so that it
automatically downloads the new firmware file from a specified location. The firmware update will be executed
when the unit is restarted.
For details, see Section 7 Firmware Update.
To Next Page
Loading...
