Button
Parameter 1 Parameter 2
Description Value Description Value
ACD Line Number 1–4
– –
Note
• For details about configuring these settings by configuration file programming, see 5.5.5 Flexible
Button Settings (KX-UT133/KX-UT136 only).
[Setting Example]
The following screen shows an example of setting flexible buttons.
Description:
• Button 1 is set to log in and log out of an ACD group on line 1.
• Button 2 is set to enable or disable talking using the headset.
• Buttons 3 and 4 are set to make/receive calls on line 1 using ringtone 1.
• Buttons 5 and 6 are set to make/receive calls on line 2 using ringtone 2.
• Buttons 7 and 8 are set to make calls to a certain destination using the One-Touch Dialing feature.
• Buttons 9, 10 and 11 are set to show the status of a certain extension. They can also be used to call that
extension and transfer calls to it.
248 Administrator Guide Document Version 2011-06
6.3.1 Flexible Button Settings
To Next Page
Loading...
