(soft button) ® [#][7][3][9]
2. [ ]/[ ]: Select "Yes" for Reset Web ID/Password ® [ENTER]
All the IDs and passwords are reset, and the unit will restart.
Notice
• Once you press [#][7][3][9], Reset Web ID/Password is performed immediately and without asking for
confirmation, regardless of the communication status. As a result, the unit is disconnected from the IP
network immediately. For security reasons, it is recommended that the passwords are set again
immediately (® see 4.4.2 Administrator Password or 4.4.3 Change User Password).
Document Version 2011-06 Administrator Guide 53
3.1.4 Reset Web ID/Password
To Next Page
Loading...
