Panasonic KX-UT133-B - Page 58

Menu Item Section Title Setting
Access
Level
*1
Ref.
U A
Static NAPT
Settings
Global IP Address Global IP Address
ü
Page 80
Enable Global IP
Address Usage per Line
Line 1–Line 4
ü
Page 81
External RTP Port Channel 1–25
ü
Page 81
*1
The access levels are abbreviated as follows:
U: User; A: Administrator
A check mark indicates that the setting is available for that access level.
*2
This setting can also be configured through other programming methods (phone user interface programming or configuration file
programming).
*3
If your phone system dealer does not allow you these settings, you cannot change them even though the unit shows the setting menu.
Contact your phone system dealer for further information.
*4
This setting can also be configured through configuration file programming.
*5
This setting can also be configured through phone user interface programming.
System
Menu Item Section Title Setting
Access
Level
*1
Ref.
U A
Web Language Web Language Language
ü ü
Page 82
Administrator
Password
Change Administrator
Password
Current Password
ü
Page 83
New Password
*2
ü
Page 83
Confirm New Password
*2
ü
Page 83
Change User
Password
Change User Password Current Password
ü ü
Page 84
New Password
*2
ü ü
Page 84
Confirm New Password
*2
ü ü
Page 85
Web Server
Settings
Web Server Settings Web Server Port
ü
Page 85
Port Close Timer
ü
Page 86
58 Administrator Guide Document Version 2011-06
4.1 Web User Interface Setting List