111
8. Sensor
Sensors (compass/altimeter) are operated
Applicable modes:
• Information measured on this unit is only a rough indication. Do not use it for technical
purposes.
• When using this unit for full-scale mountain climbing, trekking, use the measured
information (direction, altitude) only as a rough indication, and always carry a map and
purpose-built measurement tools.
∫ Activate the sensors
The direction and altitude can be measured and recorded in the recorded images.
∫ Display the compass and altimeter
The current bearing and altitude are displayed during recording, while the bearing and
altitude at the time of recording are displayed during playback.
To switch the environment information screen, press [DISP.] several times.
A Altimeter (P112)
B Compass (P114)
C Location information (only during playback)
• Location information added from the smartphone is
displayed. (P157)
D Recording date (only during playback)
> [Setup] > [Sensor Settings] > [ON]
MENU
1
(
1
IW
'(&
To Next Page
Loading...
