173
12. Connecting to other equipment
Saving still pictures and motion pictures on
your PC
You can acquire recorded pictures to a PC by connecting the camera and the PC.
• Some PCs can read directly from the card removed from the camera. For details, refer to the
operating instructions of your PC.
∫ PC that can be used
The unit can be connected to any PC capable of recognizing a mass storage device.
1
Connect the computer and camera with the USB connection cable
(supplied).
• Please turn this unit on and your PC before connecting.
• Check the direction of the terminals and plug in/out straight holding onto the plug.
(It may result in malfunction by the deforming of the terminal if it is plugged in obliquely
or in wrong direction.)
Do not connect devices to incorrect terminals. Doing so may cause malfunction.
• Do not use any other USB connection cables except the supplied one.
• A message about charging may be displayed. In this case, press any button to clear the
display.
A [USB/CHARGE] socket
B USB connection cable (supplied)
2
Press 3/4 to select [PC], and then press [MENU/SET].
3
Drag and drop files and folders in the camera to the PC.
• When the image transfer is complete, disconnect the USB connection cable safely.
• Windows support: Windows 7/Windows 8/Windows 8.1/Windows 10
• Mac support: OS X v10.5 to v10.11, macOS 10.12
Transferring images to a PC
• For Windows: A drive ([LUMIX]) is displayed in [Computer]
• For Mac: A drive ([LUMIX]) is displayed on the desktop
To Next Page
Loading...
Need help?
General
