10. Using Menu Functions
138
∫ How to select an image(s) after selecting [Single] or [Multi]
• When [Single] and [Multi] are not available, select an image in the same way as when [Single]
is selected.
:
[Playback] menu
• [Slide Show] (P139)
• [Playback Mode] (P140)
• [Location Logging] (P141)
• [4K PHOTO Bulk Saving] (P142)
• [Title Edit] (P142)
• [Text Stamp] (P143)
• [Video Divide] (P144)
• [Time Lapse Video] (P144)
•[Resize] (P145)
• [Cropping] (P146)
• [Protect] (P147)
• The [Playback] menu items below save edited images as new files. If the card is full, new
images cannot be created. We recommend that you check the card capacity in advance.
– [4K PHOTO Bulk Saving]/[Text Stamp]/[Time Lapse Video]/[Resize]/[Cropping]
• The camera may not play back images recorded on other devices correctly, and the functions
of the camera may not be available for the images.
[Single] setting
1 Press 2/1 to select the picture.
2 Press [MENU/SET].
• If [Set/Cancel] is displayed at the right bottom of the
screen, the setting is canceled when [MENU/SET] is
pressed again.
[Multi] setting
When a screen similar to the one on the right is displayed:
1 Press 3/4/2/1 to select the picture and then press
[MENU/SET] (repeat).
• The setting is canceled when [MENU/SET] is pressed
again.
2 Press 2 to select [OK], and then press [MENU/SET]
to execute.
When a screen similar to the one on the right is displayed:
Press 3/4/2/1 to select the picture, and then press
[MENU/SET] to set (repeat).
• The setting is canceled when [MENU/SET] is pressed again.
1 2 3
4 5 6
6HW&DQFHO
To Next Page
Loading...
