151
11. Using the Wi-Fi function
Controlling with a Smartphone/Tablet
With a smartphone, you can record images remotely, play back images on the camera or
save them to the smartphone.
• You need to install “Panasonic Image App” (referred to as “Image App” from this point on) on
your smartphone.
The “Image App” is an application provided by Panasonic.
•OS
• Use the latest version.
• Supported OSs are current as of May 2018 and are subject to change.
• Read the [Help] in the “Image App” menu for further details on how to operate.
• When you operate the “Image App” on the smartphone that is connected to the camera via
Wi-Fi, [Help] in the “Image App” may not be displayed depending on the smartphone. In this
case, after terminating the connection to the camera, reconnect the smartphone to a mobile
phone network such as the 3G or LTE network or to a Wi-Fi router, and then display [Help] in
the “Image App”.
• Some of the screens and information provided in this owner’s manual may differ from your
device depending on the supported OS and “Image App” version.
• The service may not be able to be used properly depending on the type of smartphone being
used.
For information on the “Image App”, refer to the support site below.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
• When downloading the app on a mobile network, high packet communication fees may be
incurred depending on the details of your contract.
Installing the smartphone/tablet app “Image App”
App for Android
TM
: Android 4.2 or higher
App for iOS: iOS 9.0 or higher
1 Connect the smartphone to a network.
2 (Android) Select “Google Play
TM
Store”.
(iOS) Select “App Store”.
3 Enter “Panasonic Image App” or “LUMIX” into the search box.
4 Select “Panasonic Image App” and install it.
To Next Page
Loading...
Need help?
General
