163
11. Using the Wi-Fi function
When sending images to PC
Preparations:
• Turn the computer on.
• Prepare folders for receiving images on the PC. (P163)
• If the workgroup of the destination PC has been changed from the standard setting, change the
setting of this unit in [PC Connection]. (P169)
∫ To create a folder that receives images
• Create a PC user account (account name (up to 254 characters) and password (up to
32 characters)) consisting of alphanumeric characters. An attempt to create a receive folder
may fail if the account includes non-alphanumeric characters.
(For Windows)
Supported OS: Windows 7/Windows 8/Windows 8.1/Windows 10
Example: Windows 7
1 Select a folder you intend to use for receiving, then right-click.
2 Select [Properties], then enable sharing of the folder.
• For details, refer to the operating instructions of your PC or Help on the OS.
(For Mac)
Supported OS: OS X v10.5 to v10.11, macOS 10.12
Example: OS X v10.8
1 Select a folder you intend to use for receiving, then click on the items in the
following order.
[File] > [Get Info]
2 Enable sharing of the folder.
• For details, refer to the operating instructions of your PC or Help on the OS.
To Next Page
Loading...
Need help?
General
