11. Using the Wi-Fi function
154
∫ Manually entering a password to set up a connection
A SSID and password
B QR code
• When the camera is ready to be connected to the smartphone,
the QR code, SSID and password are displayed.
• You can also display the information by pressing [Wi-Fi] on the
camera.
1 Turn on the Wi-Fi function in the setting menu.
2 On the Wi-Fi setting screen, select the SSID displayed on
the camera.
3 Enter the password displayed on the camera into the
smartphone. (For first time connection only)
4 Start “ Image App ”.
1 Press any button on the camera, and press [MENU/
SET].
• Confirmation screen is displayed. It is executed when [Yes]
is selected.
2 On the smartphone, close “Image App”.
On the camera
> [Setup] > [Wi-Fi] > [Wi-Fi Function] >
[New Connection] > [Remote Shooting &
View]
On your smartphone
Terminating the connection
',63&KDQJHPHWKRG
3OHDVHVFDQWKH45FRGHXVLQJಯ,PDJH$SSರ
RUHQWHUWKHSDVVZRUGLQWR:L)LVHWWLQJV
3OHDVHVHWRQ\RXUVPDUWSKRQH
66,'
3DVVZRUG
VVZRUG
To Next Page
Loading...
Need help?
General
