2. Getting Started/Basic Operations
44
Entering Text
1
Press 3/4/2/1 to select text and then press
[MENU/SET] to register.
• To continuously enter the same character, move the
cursor by pressing [T] on the zoom button.
• The following operations can be performed by moving
the cursor to the item and pressing [MENU/SET]:
– [ ]: Switch text between [A] (upper case characters), [a] (lower case characters), [1]
(numbers), and [&] (special characters)
–[]]: Enter a blank
– [Delete]: Delete a character
– [ ]: Move the entry position cursor to the left
– [ ]: Move the entry position cursor to the right
• A maximum of 30 characters can be entered.
• A maximum of 15 characters can be entered for [ ], [ ], [ ], [ ] and [ ].
2
Press 3/4/2/1 to move the cursor to [Set] and then press [MENU/
SET] to end text input.
$%&
'()
$
D
*+,
-./
012
3456
789
:;<=
'HOHWH
6HW
$
D
To Next Page
Loading...
