157
11. Using the Wi-Fi function
You can send location information acquired with a smartphone to the camera. After
sending the information, you can also write it on images stored in the camera.
• Once the location information is sent to the camera, you can also write it on images by
performing [Location Logging] (P141) in the [Playback] menu.
• Location information different from that at the time of recording may be written. Keep the
following points in mind:
– Set the camera’s [Home] setting in [World Time] to your region.
– Once you start recording location information with your smartphone, do not change the
camera’s [Home] setting in [World Time].
• Location information cannot be written on images that were recorded when the clock was not
set.
Adding location information to images stored in the camera from a
smartphone
A Start recording location
information
B Start recording images
C Finish recording the location
information
D Sending and writing location
information
GPS
To Next Page
Loading...
Need help?
General
