4. Focus, Brightness (Exposure) and Color tone Settings
70
Compensating the Exposure
Applicable modes:
Use this function when you cannot achieve appropriate exposure due to the difference in
brightness between the subject and the background.
1
Press 3 (È).
2
Press 2/1 to compensate the exposure and
then press [MENU/SET].
• The exposure compensation value appears on the
screen.
• Select [0] to return to the original exposure.
Underexposed Properly exposed Overexposed
Compensate the exposure
towards positive.
Compensate the exposure
towards negative.
• You can set the exposure compensation value in the range between j5 EV and i5 EV.
Settings can be made within a range of
j3 EV to i3 EV while recording motion pictures,
recording 4K photos, or recording in [Post Focus].
• When the exposure value is out of the j3EV to i3 EV range, the brightness of the recording
screen will no longer change.
It is recommended to record by checking the actual brightness of the recorded image in the
Auto Review or playback screen.
• The set exposure value is memorized even if the camera is turned off. (When [Exposure
Comp. Reset] (P136) is set to [OFF])
+3+3+
+1+1 +2+2 +3+3
-
5
-
5
-
4
-
4
-
3
-
3
-
2
-
2
-
1
-
100
+1
+5+5+4+4
To Next Page
Loading...
Need help?
General
