11. Using the Wi-Fi function
160
∫ Send Images Stored in the Camera
Images can be selected and sent after recording.
[Single Select] setting
1 Press 2/1 to select the picture.
2 Press [MENU/SET].
[Multi Select] setting
1 Press 3/4/2/1 to select the picture and then press
[MENU/SET] (repeat).
• The setting is canceled when [MENU/SET] is pressed
again.
2 Press 2 to select [OK], and then press [MENU/SET].
• The number of pictures that can be sent by [Multi Select] is
limited.
• To terminate the connection, press 3/4 to select [Exit], and then press [MENU/SET].
∫ Changing the settings for sending images
Pressing [DISP.] after completing a connection allows you to change the settings for
sending such as the image size for sending.
Not available in these cases:
• Images recorded with a device other than the camera and images modified or edited on a PC
may not be sent.
[Size]
Resize the image to send.
[Original]/[Change]
• You can select the image size for [Change] from [M], [S] or [VGA].
The aspect ratio does not change.
To Next Page
Loading...
