185
13. Others
• When recording under fluorescent or LED lighting fixture, etc., increasing the shutter speed
may introduce slight changes to brightness and color. These are a result of the characteristics
of the light source and do not indicate a malfunction.
• When recording subjects in extremely bright locations or recording under fluorescent lighting,
LED lighting fixture, mercury lamp, sodium lighting, etc., the colors and screen brightness may
change or horizontal striping may appear on the screen.
• You may not be able to record for a short while after turning this unit on when using a large
capacity card.
• 4K motion pictures cannot be recorded during Wi-Fi connection.
• When the ambient temperature is high or motion picture is recorded continuously, the camera
may display [ ] and stop the recording to protect itself. Wait until the camera cools down.
• Depending on the [Rec Quality] of a motion picture, the speed class rating required for the card
differs. Use a card that meets the rating. (P27)
• This phenomenon occurs when the camera is trying to record with highly accurate focus at a
reduced Auto Focus speed, and is not a malfunction.
• When recording in a quiet environment, the sound of aperture, focus or zoom operation may be
recorded in motion pictures.
Focus operation can be set to [OFF] in [Continuous AF] (P108).
• While recording motion pictures, plugging the aperture of the microphone with a finger may
reduce the level of audio recording or audio may not record at all. Also be careful because the
operation sound of lenses can easily be recorded at this time.
The brightness or the hue of the recorded picture is different from the actual
scene.
Motion pictures
Recording motion pictures is not possible.
Motion picture recording stops in the middle.
Sometimes it is difficult to focus with Auto Focus when recording 4K motion
pictures.
In motion pictures, abnormal clicking and buzzing sounds are recorded.
The recorded sound is very quiet.
To Next Page
Loading...
Need help?
General
