165
11. Using the Wi-Fi function
3 Press 3/4 to select the PC you want to connect to, and then press [MENU/
SET].
• When the PC you want to connect to is not displayed, select [Manual Input], and enter the
computer name of the PC (NetBIOS name for Apple Mac computers).
4 Press 3/4 to select the destinations folder of the PC, and then press [MENU/
SET].
5 Check the send setting, and then press [MENU/SET].
• To change the send setting, press [DISP.]. (P160)
6 When [Send Images While Recording] has been selected
Take pictures. (P159)
When [Send Images Stored in the Camera] has been selected
Select the picture. (P160)
• Folders sorted by the sent date are created in the specified folder, and pictures are saved in
those folders.
• If the screen for a user account and password entry appears, enter the one you set on your
PC.
• When the computer name (NetBIOS name for Apple Mac computers) contains a space (blank
character), etc., it may not be recognized correctly.
If a connection attempt fails, we recommend that you change the computer name (or NetBIOS
name) to the one consisting of only alphanumeric characters, with a maximum of
15 characters.
• When the firewall of the OS, security software, etc. is enabled, connecting to the PC may not
be possible.
To Next Page
Loading...
