11. Using the Wi-Fi function
170
To prevent incorrect operation or use of the Wi-Fi function by a third party and to protect
saved personal information, it is recommended that you protect the Wi-Fi function with a
password.
Setting a password will automatically display the password input screen when the Wi-Fi
function is used.
• Make a copy of password.
If you forget the password, you can reset it with [Reset Wi-Fi Settings] in the [Setup] menu,
however other settings will also be reset.
Displays the MAC address and IP address of this unit.
• A “MAC address” is a unique address that is used to identify network equipment.
• “IP address” refers to a number that identifies a PC connected to a network such as the
Internet. Usually, the addresses for homes are automatically assigned by the DHCP function
such as a wireless access point. (Example: 192.168.0.87)
Displays the certification number for radio regulations.
[Wi-Fi Function Lock]
[Setup]
Enter any 4-digit numbers as the password.
• For information on how to enter characters, refer to P44.
[Cancel] —
[Network Address]
[Approved Regulations]
To Next Page
Loading...
