3. Recording Modes
46
The camera detects scenes automatically (Scene Detection)
( : When taking pictures, : When recording motion pictures)
¢1 Only displayed when the flash is set to [ ].
¢2 Only displayed when [iHandheld Night Shot] is set to [ON]. (P47)
•[¦] is set if none of the scenes are applicable, and the standard settings are set.
• When recording 4K photos or when recording using [Post Focus], Scene Detection works the
same way as when recording motion pictures.
∫ Auto Focus
The Auto Focus Mode is automatically set to [š].
• Face Detection may become slower or it may not detect underwater.
• You can set [ ] ([Tracking]) with [AF Mode] in the [Rec] menu. Aim the AF
tracking frame over the subject and press the shutter button halfway to
operate the AF tracking function. (P65)
∫ Flash
When [ ] is selected, [ ], [ ], [ ] or [ ] is set depending on the type of subject
and brightness.
• When [ ] or [ ] is set, Red-Eye Removal is enabled.
• Shutter speed will be slower during [ ] or [ ].
∫ Scene Detection
• If a tripod is used, for instance, and the camera has judged that camera shake is minimal when
the scene detection has been identified as [ ], the shutter speed will be slower than normal.
Take care not to move the camera while taking pictures.
• Depending on recording conditions, different scene types may be selected for the same
subject.
[i-Portrait] [i-Scenery] [i-Macro] [i-Night Portrait]
¢1
[i-Night Scenery]
[iHandheld Night
Shot]
¢2
[i-Sunset] [i-Low Light] ¦
To Next Page
Loading...
Need help?
General
