5. 4K Photo and Drive Settings
94
3
Press the shutter button fully.
• The recording starts automatically.
• During recording standby, the power will turn off automatically if no operation is
performed for a certain period. The Time Lapse Shot is continued even with the power
turned off. When the recording start time arrives, the power turns on automatically.
To turn on the camera manually, press the camera [ON/OFF] button.
• Operations during recording standby (The camera is turned on)
• After the recording stops, a confirmation screen will be displayed, asking whether to
proceed to create a motion picture.
To create a motion picture, select [Yes].
4
Select the methods for creating a motion picture.
• The recording format is set to MP4.
5
Press 3/4 to select [OK] and then press [MENU/SET].
• Motion pictures can also be created from [Time Lapse Video] in the [Playback] menu.
(P144)
Button operation Description of operation
[Fn1]
Displays a selection screen that lets you pause or stop the
recording
Displays a selection screen that lets you resume or stop the
recording (during pause)
[Rec Quality] Sets the quality of a motion picture.
[Frame Rate]
Sets the number of frames per second.
The larger the number is, the smoother the motion picture will
be.
[Sequence]
[NORMAL]:
Splices pictures together in recording order.
[REVERSE]:
Splices pictures together in reverse recording order.
To Next Page
Loading...
Need help?
General
