Panasonic SD-PM107 - Remedies for Misoperations

EN44
Pressed " " before adding any ingredients.
➜
The ingredients other than natural yeast (fermented) can be added at the following time.
However, the bread making process may fail if the ingredients are not fully mixed in the initial
揉麵
(Kneading) procedure.
Forgotten ingredients Adding time
Butter
Granulated sugar
Milk powder
Salt
•Tips for recipe of bread with instant dry yeast
Place into the bread pan before adding the instant dry yeast.
•
Pizzadough
..........................................................
within1minutes
•
Brioche,Danish
....................................................
within5minutes
•
Breaddough
........................................................
within10minutes
•
Rice flour bread
..................................................
within35minutes
•
Other menu
.........................................................
within 20 minutes
Openthelidtotheminimumangletoavoidspillofinstantdryyeasts.
•Tips for recipe of bread with natural yeast
Itshouldbeaddedintothebreadpanwithin10minutestomakesurethatitcanbe
mixed in the initial 揉麵(Kneading).
Instant dry yeast
Add into the yeast dispenser before the instant dry yeast is dispensed.
•
Pizzadough
..........................................................
within1minutes
•
Brioche,Danish
....................................................
within5minutes
•
Breaddough
........................................................
within10minutes
•
Rice flour bread
..................................................
within35minutes
•
Other menu
.........................................................
within 20 minutes
Pressed " " (Start) when the wrong menu, raisin and crust colour are selected!
➜
Reselect if it is just started. Hold " " to stop operation, select the correct menu*
1
, raisin and crust
colour function, and then restart.
*1Butifyouchosericeflourbreadwrongly,thebreadstillfailevenifyoureselectthemenu.(Theinitialworkingprocedure
is different.)
Install the wrong blade and start the main unit!
➜
Press and hold " " button to stop the main unit. Reinstall the correct blade and restart the main unit.
(The blade may stop rotating if it is not the correct one.)
Pull out the power plug!
➜
Plug in again within 10 minutes after unplugging. The operation will be resumed.
•
Do not press " ".
Pressed " " accidently during operations!
➜
Press " " to recover within 10 minutes.
•
Only valid for once. Do not press other buttons.
■
Failed dough can be used again to make Pizza and Doughnuts. (P. EN25, EN39)
Remedies for misoperations
SD-PM107_P36-47.indd 44 3/5/2018 13:53:31