Parker 10G-46-0600-BF

Parameter Reference 15-19
AC10 Inverter
Function
Code
Function
Definition
Setting Range
Mfr’s Value
Change
2: Analog input AI
FC25
Reverse speed limit (%)
0～100.0
10.0
√
FC26-
FC27
Reserved
FC28
Driving torque limit source
0: Digital given (FC30)
1: Analog input AI1
2: Analog input AI2
0
╳
FC29
Driving torque limit coefficient
0～3.000
3.000
╳
FC30
Driving torque limit (%)
0～300.0
200.0
√
FC31
Reserved
FC32
Reserved
FC33
Re-generating torque limit source
0:Digital given (FC35)
1: Analog input AI1
2: Analog input AI2
0
╳
FC34
Re-generating torque limit coefficient
0～3.000
3.000
FC35
Re-generating torque limit (%)
0～300.0
200.0
√
FC36-
FC40
Reserved
Note:
╳ indicating that function code can only be modified in stop state.
√ indicating that function code can be modified both in stop and run state.
△ indicating that function code can only be checked in stop or run state but cannot be
modified.
○ indicating that function code cannot be initialized as inverter restores manufacturer’s value
but can only be modified manually.