SGM700 Digitizer
Configuration Menu -dAC- -continue-
The options are:
For further detais on the
weigher functions check appendix I
The following screen will be vissable:
In dAC 5 you set the weigher start value for the analog output. At this value the
analog output starts with its minimum value. Press key 2 < 2sec. to enter dAC 5.
Fill in the wanted start weight using key 1 and key 2. Key 1 is for chang-
ing the number (1-9), key 2 is for changing the position of the cursor.
Confirm by pressing key 3 >2 sec.
In-
crease Decrease Left Right Confirm
38
1 Weigher 10 Weigher x 10
2 Fast gross 11 Fast gross x 10
3 Fast net 12 Fast Net x 10
4 Display Gross 13 Display Gross x 10
5 Display Net 14 Display Net x 10
6 Tare 15 Tare x 10
7 Peak 16 Peak x 10
8 Valley 17 Valley x 10
9 Hold 18 Hold x 10
19 Signal
To Next Page
Loading...
