SGM700 Digitizer
Configuration Menu -FIL- -continue-
The following screen is visible:
Use key 1 change the filter. Confirm by pressing key 3 for >2 sec.
Up Down Confirm
.
The following screen is visible:
In FIL 3 you set the band within the indicator will show
0. When the indicator is certified, this parameter will be disabled. Choose a value
between 000000 and 999999. Press key 2 <2 sec. to change the zero suppress-
ing band.
The following screen is visible:
Use key 1 and 2 to change the value. Key 1 is for changing the number
(1-9), key 2 is for changing the position of the cursor. Confirm by pressing
key 3 for >2 sec.
Up Down
Left Right Confirm
The following screen is visible:
72
To Next Page
Loading...
