17
• Please be sure to do inserting SD card in state of camera OFF.
• Please be sure to start camera in the state that SD card was inserted.
• Before inserting SD card, please confirm that it is in the horizontal and vertical direction
locking state.
1.6.4 Removing SD card for camera data
① Please open SD&USB cover as same as inserting SD card.
② Please release after pushing the SD card a little in the plug direction.
③ SD card will pop out slightly.
④ After removing SD card, please do close SD&USB plug-in cover when using.
To Next Page
Loading...
Need help?
General
