5
PRECAUTIONS REGARDING SAFETYxxxx xxxxxxxxx
Safety precautions (Must be followed)
The following items are intended to prevent possible injury to the user or other people and/or
damage to the instrument before it occurs. These safety precautions are important to the safe
operation of this product and should be observed at all times.
Distinctive displays
The following displays are used to distinguish precautions by the degree of injury or damage
that may result if the precaution is ignored.
WARNING
Items indicated by this sign are precautions which, if ignored, would result in serious injury.
CAUTION
Items indicated by this sign are precautions which if ignored may result in injury or material
damage.
• Here “injury” refers to injuries such as cuts, burns or electric shock the treatment of which
will not likely require hospitalization or long-term attention.
• “Material damage” refers to damage to facilities, buildings, acquired data, etc.
Before using this product, be sure that you have thoroughly read and understood this
instruction manual to ensure proper operation. After reading this manual, be sure to keep it in
a convenient place for easy reference.
This instrument complies with the protection requirement for residential and commercial
areas. If this instrument is used close to industrial areas or transmitters, the equipment can be
influenced by electromagnetic fields.
Quick Reference Guide provided in your carrying case contains the following items:
1. Basic Procedures,
2. Power Topo Lite Operating Procedures
WARNING
Do not stare into the laser beam directly as this may result in damage to your eyes.
R-2500DN is a Class IIIa (3R) Laser product. Do not look into the laser radiation aperture
directly as this may result in damage to your eyes.
Never use the telescope to view intense light such as direct sunlight or sunlight reflected
through a prism as this may result in loss of sight.
Do not disassemble, modify or repair this product as there a risk of laser radiation.
To Next Page
Loading...
Need help?
General
