36
4.3 Adjusting illumination brightness
Press [F5] while holding down the Illumination key
to access the screen for adjusting
illumination brightness.
Pressing the [F1] [ ] will decrease brightness,
while pressing the [F2] [ ] will increase
brightness.
Press [ENT] to exit adjustment mode and return to
the previous screen.
• Pressing the Illumination key views the [F3] [RETICLE], [F4] [LCD] and [F5] [ILLU].
• Illumination brightness of the LCD screen and telescope reticle may be adjusted as
necessary at any time.
• Illumination brightness may be adjusted to any one of 10 levels.
4.4 Adjusting reticle illumination
Press [F3] while holding down the Illumination key to access the screen for adjusting reticle
illumination. The procedure to adjust the reticle illumination is the same way as 4.3.
• Pressing the Illumination key views the [F3] [RETICLE], [F4] [LCD] and [F5] [ILLU].
To Next Page
Loading...
Need help?
General
