Pentax R-2500DN Series - Adjusting the Camera Settings

69
10.6 Adjusting the camera settings
Press [F3] [Setting] key in the RED MARK &
CAMERA SETTINGS screen. Snap and photo
conditions are defined in the Setting menu in the
camera settings.
1. White Balance
Color tone correction is defined by selecting one of the
options; [Auto], [Daylight], [Light Bulb], [Fluorescent], and
[Cloudy]. Each time the option setting is changed, the icon
shown at the bottom of the screen is also changed. No icon is
shown for [Auto], which is the default setting.
Example: Icons for Color tone
2. EV
EV (Exposure Value) is specified by selecting from -2.0 to
+2.0 in 0.5 step.
Each time the option setting is changed, the EV shown at the
bottom of the screen is also changed.
No EV is displayed when [0.0] is selected, which is the default
setting.
CloudyFluorescent
LightBuib
Daylight
Auto
X1.AutoXXXXXXXXX
2.Daylight
3.LightBuib
4.Fluorescent
5.Cloudy
X1.-2.0XXXXXXXXX
2.-1.5
3.-1.0
4.-0.5
5.0.0
6.+0.5
7.+1.0
8.+1.5
9.+2.0