76
[ZOOM IN], [ZOOM OUT] : 1-8 times zoom is available for Point Mark Position
Adjustment, but not for recording images.
Press [F5] [MODE] key to switch the screen to
P.mark 2/3, and adjust the Point Mark position by
using the function keys.
Press [ENT] to save the image with the Point Mark in the adjusted position.
The screen returns to View mode.
Press [F5] [MODE] key to switch the screen to
P.mark 3/3.
Press [F2] [MOVE INP] key in the “P.mark 3/3”
screen to proceed to “Cursol move input” screen.
Input the smallest movement amount of the
PointMark and press [ENT].
In the of P.mark 1/3 and P.mark 2/3 and P.mark 3/3 screens, press [ESC] to return to the
View 1/2 screen. The image without Point Mark is saved in this case.
Using this function, the yellow point mark is recorded to distinguish this from measuring +
SNAP.
To Next Page
Loading...
Need help?
General
