IOLAN SDS/SCS/STS/MDC User’s Guide 99
Network Settings Chapter 6
6
Introduction
The Network section is used to configure the parameters that identify the
IOLAN within the network and how the IOLAN accesses hosts on the
network. The following configuration windows are available:
z IP Settings—This window configures the IOLAN’s name, IP
address, and Ethernet information.
z Advanced—This window configures hosts that the IOLAN will be communicating with, routes,
DNS/WINS servers, RIP, Dynamic DNS, and IPv6 Tunnels.
IPv4 Settings
Overview
The parameters in IPv4 settings are used to access the IOLAN and how the IOLAN accesses the
network.
Field Descriptions
Configure the following parameters:
To Next Page
