Perle IOLAN SDS - Connecting the IOLAN to the LTE;3 G Network; Installation of the Microsim Card; Configuring Your IOLAN SDS L

Hardware and Connectivity 46
Connecting the IOLAN to the LTE/3G Network
6. Should a dialog box appear on your PC’s screen to connect to the network, press the continue/Ok
button to complete the connection to the IOLAN.
7. Use a Web browser to connect to the default address of the IOLAN at (192.168.0.1).
The default userid is admin and the default password is superuser (case sensitive).
You can now configure and manage your IOLAN using the IOLAN WebManager application.
Note: You should change the admin password to restrict unauthorized access to your IOLAN.
For additional methods of configuring your IOLAN (i.e., HTTP, Telnet, SNMP), please refer to the
IOLAN User’s Guide.
Connecting the IOLAN to the LTE/3G Network
Installation of the MicroSIM card.
See the section in the manual for installing your MicroSIM card. Installing a MicroSIM card into
your SDS L .
Configuring your IOLAN SDS L
To configure your IOLAN SDSL see the section in the manual. LTE/3G .