186
Serial Port Profiles
Strict Host Key
Checking
When enabled, a host public key (for each host you wish to ssh to) must be
downloaded into the IOLAN.
Default: Enabled
Auto Login When enabled, creates an automatic SSH login, using the Name and Password
values.
Default: Disabled
Name The name of the user logging into the SSH session.
Field Format: Up to 20 alphanumeric characters, excluding spaces
Password The user’s password when Auto Login is enabled.
Field Format: Up to 20 alphanumeric characters, excluding spaces
SSH1 When enabled, selects an SSH version 1 connection.
Default: Enabled
SSH1 Cipher Select the encryption method (cipher) that you want to use for your SSH
version 1 connection:
Data Options:
z 3DES
z Blowfish
Default: 3DES
SSH2 When enabled, selects an SSH version 2 connection. If both SSH 1 and SSH 2
are selected, the IOLAN will attempt to make an SSH 2 connection first. If that
connection fails, it will attempt to connect to the specified host using SSH 1.
Default: Enabled
SSH2 Ciphers
Opt1-8
Select the order of negotiation for the encryption method (ciphers) that the
IOLAN will use for the SSH version 2 connection:
Data Options:
z ChaCha20-Poly1305
z AES-CTR
z AES-GCM
z AES-CBC
z 3DES
z Blowfish
z CAST
z Arcfour
RSA When enabled, an authentication method used by SSH version 1 and 2. Use
RSA authentication for the SSH session.
Default: Enabled
DSA When enabled, an authentication method used by SSH version 2. Use DSA
authentication for the SSH session.
Default: Enabled
Keyboard
Authentication
When enabled, the user types in a password for authentication.
Default: Enabled
To Next Page
Loading...
