342
Management
Version
Select the version of trap you want the IOLAN to send. Valid options are v1,
v2c or v3.
Default: v1
Type Select between Trap and Inform. Inform requires the host receiving the trap to
acknowledge the receipt of the trap.
Community The name of the group that devices and management stations running SNMP
belong to. Community only applies to SNMP v1 and v2c
HTTP Tunnel Specify the HTTP tunnel to be used for this connection.
Timeout
This is only used for Inform traps. Select the number of seconds to wait for the
acknowledgement of the trap.
Default: 1 second
Retries
This is only used for Inform traps. Select the number of times the trap will be
sent if no acknowledgement is received.
Default: 3
V3 Trap User
This field identifies the system sending the traps to the host receiving the traps.
Same user name is used for all traps sent by this system.
V3 Trap Security
Level
Select the security level for the V3 traps. This must match the configuration set
up in the SNMP manager.
Data Options:
z None—No security is used.
z Auth—Trap authentication is used.
z Auth/Priv—Trap authentication and privacy (encryption) settings are
used.
Default: None
V3 Trap Auth
Algorithm
Specify the authentication algorithm that will be used for the read-only user.
Data Options: MD5, SHA
Default: MD5
V3 Trap Auth
Password
Type in the password associated with traps sent from this host.
V3 Trap Confirm
Password
Re-enter the password associated with traps sent from this host.
V3 Trap Privacy
Algorithm
Specify the privacy algorithm (encryption) which will be used with traps.
Data Options: DES, AES
Default: DES
V3 Trap Privacy
Password
Type in the password associated with the encryption method being used for
traps.
V3 Trap Confirm
Password
Re-type the password associated with the encryption method being used for
traps.
To Next Page
Loading...
