Sealing
43
8311 DUAL with motorised puller Standard 8311
The ultrasonic parameters and speed are each given 2 values for dynamic welding: The
maximum value when the pedal is fully depressed and the minimum value when the pedal
is pressed lightly.
The maximum value is displayed as a large number and the minimum value is displayed as
a small number below it.
The associated maximum parameter can be increased or decreased in increments with the
/ keys
Ultrasonic power/amplitude
see chapter 10.02.02 Ultrasonic power/amplitude.
Max. amplitude input Change-over Min. amplitude input
Max. power input Change-over Min. power input
Feed roller speed
see chapter 10.02.05 Feed roller speed .
Max. speed input Min. speed input
To Next Page
Loading...