Pfaff 3822-1/32 - Retaining Spring

13 - 43
Adjustment
24V = 4% ED
13.06.10 Retaining spring
Requirement
When the thread trimmer is in resting position, the distance between the retaining spring
1 and the roller lever
3 3
3 3
3 should be 0.5 mm.
3
2
1
0.5 mm
● Position retaining spring 1 together with the cover disk.
● Tighten screws 2 sligthly.
● Push retaining screw 1 up to the stop and adjust in accordance with the requirement.
● Tighten screws 2 firmly.
Fig. 13 - 42