11 - 10
Input
11.02.02 Programming / Alterations
With the function programming, seam programs, which have already been compiled, can
be altered. However, new seam programs can also be compiled.
● Select mode INPUT.
● Call up function program selection.
● Enter desired program number from 2 – 200 .
● Confirm input with Enter key.
● Call up function Programming.
Enter
0
0
2
to
2
Display in the status line:
Program number
The number of the selected seam program appears after this symbol.
Right seam areas
The number of seam areas for right parts is displayed after this symbol.
Number of stitches
The number of stitches in the current seam area is shown after this symbol.
Fullness
The amount of fullness in the current area is shown after this symbol.
Required seam length
The required seam length of the current area is shown after this symbol.
Displays in text description field:
Beginning of seam
Current seam area
Seam area being inserted at present
End of seam
2
1
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
bdf
34 00
1
To Next Page
Loading...
Need help?
General
