Pfaff 3822-1/32 - Adjusting the Stop Eccentric

13 - 52
Adjustment
49-43
13.07.05 Adjusting the stop eccentric
Requirement
When stop 4 is touching eccentric 2, there should be a distance of approx. 5 mm
between the front edge of the case and lever 5.
● Pull down lifting rod 1 as far as possible.
● Adjust eccentric 2 (screw 3) according to the requirement.
Fig. 13 - 51
1
3
2
5
4
49-063
5 mm