Pfaff 3822-1/32 - Front Linkage Rod to Top Feed Drive

13 - 16
Adjustment
13.05.14 Front linkage rod to top feed drive
Requirement
With the needle bar positioned 0.6 past t.d.c. (adjustment hole 1), there must be a
distance of approx. 16.5 mm between the eye of the linkage rod 2 and machine case 3.
● Bring needle bar to 0.6 past t.d.c..
● Loosen screw 1.
● Adjust linkage rod 2 according to the requirement.
● Tighten screw 1.
● Check the setting.
Fig. 13 - 15
2
16.5 mm
2
3
1
49-020a
1
5
4
6
3