Pfaff 3822-1/32 - Engaging Lever

13 - 39
Adjustment
49-094
24V = 4%
ED
49-095
0.3 - 0.5 mm
13.06.06 Engaging lever
Requirement
When the needle bar is at the t.d.c and the thread trimmer is in resting position, the
distance between the roller of the roller lever 3 and the outer diameter of the control cam
4 should be between 0.3 and 0.5 mm.
3
4
2
1
Fig. 13 - 38
● Turn screw 1 (nut 2) in accordance with the requirement.
● Check distance in accordance with the requirement.
3
4