Sewing
10 - 3
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
bdf
167
● Using the keyboard, the value for the fullness can be changed in part steps, see
Chapter 7.07 Keyboard.
● Using the knee switch, it is possible to change from one amount of fullness to the
other.
Displays in the status bar:
Program number
The number of the selected seam program appears next to this symbol.
”Manual sewing of 2 amounts of fullness” is selected with program number ”1”.
Top fullness/bottom fullness
The current value for the top or bottom fullness is shown next to these symbols. The
bottom fullness is marked with ”-”.
Functions in the pictogram bar:
Program selection
This function opens a direct menu for selecting the desired seam program.
Fullness
This function opens a direct menu for the input/alteration of the desired fullness. The value
for the fullness from + 50 to – 50 can be entered with the number keys.
Type of material
To achieve the same results (amounts of fullness) when working with different types of
materials, with this function 3 types of material can be selected directly, see
Explanations in Chapter 10.02.01 Manual sewing with one amount of fullness.
1
10.02.02 Manual sewing of 2 amounts of fullness alternately (program number 1)
● Select SEWING
mode.
● Select program selection
function (number key 1).
● Enter program number 1.
● Confirm input with Enter.
To Next Page
Loading...
Need help?
General
