17
8 SW version
Shows current Phenom software version.
Previous
Shows previous Phenom software version.
Rollback
Returns to previous software version.
S
hutdown
Prepares the Phenom for complete switch-off.
StoreSysInfo
Stores a file with the current system information on the USB Flash drive (fig. 1,10).
SW version, Previous, Rollback, Shutdown and StoreSysInfo are advanced
settings that can be accessed by touching the Advanced button (11) and entering the
log-in password. Only visible when Advanced is activated. Refer to 11 ‘Advanced’.
9 Mode
Switches the Phenom to standby or hibernate (power saving) mode.
10 USB stick
Formats USB Flash drive or delete content on USB Flash drive.
11 Sample holder
Displays the sample holder name when an activated sample holder is inserted.
No sample holder inserted lights up when:
- you start imaging without a sample holder inserted.
- the inserted sample holder needs to be activated. Refer to 4.3.1 ‘Activating the
sample holder’.
12 Advanced
Protected login modes for experienced users.
13 Acquired image
Adjusts and stores settings such as pixel resolution, picture quality and detector mode
for images to be saved.
To Next Page
Loading...