Phoenix LT4 - Illustration

Phoenix LT4 Lane Machine Operation, Maintenance, and Parts Manual
3-32 Rev. Date: 01/22 61-900040-000
3.10.2 Illustration
The following drawing illustrates where the Phoenix LT4 performs actions when cleaning,
oiling for 20 feet, and buffing for 40 feet are enabled on the first pass; and then oiling to 15
feet, and buffing to 25 feet on the second pass. The center's actual settings might be
different.
Foul Line
Buffing Stops
40 ft - 1
st
Pass
Buffing Resumes
40 ft - 1
st
Pass
Oiling Stops
15 ft - 2
nd
Pass
Oiling Resumes
15 ft - 2
nd
Pass
Buffing Stops
25 ft - 2
nd
Pass
Buffing Resumes
25 ft - 2
nd
Pass
End of Lane
Shakes (2)
FIRST PASS
1 ft - Machine
Stops Between
Passes & at
End of Program
Oiling Resumes
20 ft - 1
st
Pass
Oiling Stops
20 ft - 1
st
Pass
Vacuuming Stops
(5 feet on return)
Cleaning Stops
(Vacuuming Continues)
SECOND PASS
Over travel 2 ft
Over travel
return 2 ft