61-900040-000 Rev. Date: 01/22 5-1
Section 5
TROUBLESHOOTING
This section describes some problems that may be encountered when using the Phoenix
LT4 Lane Machine, and their solutions. Also included in this section is the procedure to
follow if the Phoenix LT4 stops in the middle of an operation.
5.1 OPERATIONAL PROBLEMS AND SOLUTIONS
Problems are grouped into one of three categories:
Problems with the machine that are not related to a
specific operation.
Problems specific to the cleaning operation.
Problems specific to the oiling and buffing operations.
If a problem cannot be resolved with the solutions contained in this section or a problem not
included in this section is encountered, contact the Brunswick Customer Response Center.
Their number is given below.
1-800-YES-BOWL (1-800-937-2695)
Additionally, Technical Support can be reached by e-mailing techsupport@brunbowl.com or
by fax at 1-231-725-4667.
NOTE
The solutions given in this section should be performed only by experienced operators
who are accustomed to working with machines, electrical components, and parts
drawings. Do not attempt to repair or adjust the Phoenix LT4 Lane Machine if any of
the steps given for a possible solution are not understood.
To Next Page
Loading...